Timely affordable repairs by experienced technicians.
- Coin Mechanisms
- Refrigeration
- Control Boards
- Set-up and Installation
With a full workshop at hand we can repair anything from the simplest coin mech cleaning right up to full refrigeration unit refurbishing.
- Coin Mechs Cleaned, Repaired, Jams Cleared
- Control Boards Repaired or Replaced, Reprogrammed
- Shelf Motors/ Column motors Replaced
- Wiring looms repaired or replaced
- Refrigeration Fan Motors replaced
- Fridges vacuumed, Refrigeration gas recovered, new gas weighed in at exact manufacturer spec. & thoroughly checked for leaks (adding gas to fridges without first removing the old gas and pulling a vacuum WILL result in the unit failing and the costly expense of a new compressor)
- We have a number of the more popular fridge units available fully refurbished & off the shelf on a service exchange basis – getting you up and running right away.
Set-Up & Installation service.
A vending machine that is installed correctly will rarely, if ever, fail mechanically. Properly installing and setting up a vending machine is an intensive process, and is imperative to the success of that machine. We will take your machine through the entire procedure, setting it up from scratch- levelling, programming, calculating proper clearances, re-spacing shelving heights, testing motors, fine tuning sub-menu settings, resetting float levels and setting up the coin mechanism.